Home / Alat Instrument / Equotip Piccolo/Bambino 2

Equotip Piccolo/Bambino 2

Deskripsi

Equotip Piccolo/Bambino 2

Equotip Piccolo 2 

Piccolo Bambino 4For real-time monitoring and user specific conversions

Metal heat treatment allows mechanical
properties to be changed so that the metal will be harder, stronger and
more resistant to impact. The Piccolo 2 is used to monitor and document
the strengthening of high integrity metal components for the automobile
industry. Automotive Lifting Technology are subject to stringent
requirements that need to be met by an automotive lift manufacturer. The
portability of the Piccolo 2 is ideal for testing bulky lift
components.

Equotip Bambino 2 

Piccolo Bambino 3For quick on-site hardness checks

Scuffing can lead to catastrophic
failure in engineering components. E.g. in turbines of power plants
where wearable parts are required to endure high mechanical stress. The
Bambino 2 with the DL probe can be used to ensure that stressed
recesses, joints and edges are of the correct hardness to minimize
scuffing. Cold rolling is often used to decrease the thickness of sheet
metal. To avoid spall fracture, Equotip and Equotip’s Leeb hardness unit
HL are used as a standard for roll testing in rough environments. The
light-weight Equotip Bambino 2 lends itself to quick intermittent checks
of rolls.

The Differences between Piccolo 2 and Bambino 2

The Equotip Piccolo 2 and Bambino 2 are
both suited for on-site hardness checks of metals where the test
indentation should be as small as possible. The robust design and large
display allow the user to work at dusty worksites with low visibility.
Both products also display metal hardness in all common scales.

The Equotip Piccolo 2 offers the same features as the Equotip Bambino 2, but has the following additional features:
1) user defined hardness conversions
2) Piccolink software for:
a) systematic real-time monitoring of hardness
b) automated testing during serial production
c) evaluation and processing of measured data
d) remote controlling of Piccolo 2 settings

Equotip Piccolo 2 and Bambino 2 are
supplied with a D impact device. It can be interchanged with an optional
DL impact device, which is useful for measurements in restricted areas.

Leeb rebound principleLeeb Rebound Principle of Equotip Hardness Testers

The portable hardness testers used most
commonly for metals are based on the Leeb rebound method inventedby
Proceq SA. The Equotip Piccolo 2 / Bambino 2 operate according to the
Leeb principle, in whichthe hardness value is calculated from comparing
the energy of a test body before and after impacting on asample. This
Energy QUOtient (EQUO) is quoted in the hardness unit HL and is
calculated from comparingthe impact and rebound velocities (vi , vr) of
the impact body. It rebounds faster from harder samples thanfrom softer
ones, resulting in a greater energy quotient which is defined as
1000·vr/vi.

Immediate Conversion to established Metal Hardness Scales

Metal hardness can be displayed in
different hardness scales: HL (Leeb), HRC (Rockwell C), HB (Brinell), HV
(Vickers) and so forth. The Equotip Piccolo 2 / Bambino 2 enables
measurements to be rapidly taken and displayed in any chosen hardness
scale. The Equotip Piccolo 2 has an additional feature that lets the
user customize conversion curves for special alloys and also allows the
user to convert hardness readings into tensile strength.

Benefits

  • Entry model for quick on-site tests
  • Compact housing and automatic angle correction allow flexible use
  • Comes with the high accuracy known for all Equotip products

Features

Firmware:

  • Automatic compensation for impact direction
  • Integration in automated testing environments (incl. remote control): Equotip Piccolo 2 only
  • Language independent

Software:

  • Piccolink software (Equotip Piccolo 2 only)

Display & Memory:

  • Monochrome 4-digit display
  • 32 KB memory (~ 2’000 readings) (Equotip Piccolo 2 only)

Connections:

  • USB interface to PC

DL Accessory KitKey Accessories

  • Equotip DL Accessory Kit – This is a
    unique feature offered by Proceq. It allows the user of a Piccolo 2 /
    Bambino 2 to quickly and easily interchange the D and DL impact devices.Test blocks
  • Test Blocks – It is necessary to
    regularly conduct 3 to 10 test impacts on a reference hardness object to
    verify the correct operation of the Equotip device. Various test blocks
    are available depending on the users’ hardness requirements. For added
    convenience, the test blocks also indicate the reference hardness value
    in different hardness scales.
  • Support ringsSupport
    Rings – Leeb rebound testers only work correctly when the impact body
    is held at a proper distance from the test surface during impact. The
    wide range of support rings permits testing on a great variety of part
    geometries, i.e. flat surfaces, concave or convex cylindrical surfaces,
    spherical test surfaces.

Feature

Firmware:

  • Automatic compensation for impact direction
  • Integration in automated testing environments (incl. remote control): Equotip Piccolo 2 only
  • Language independent

Software:

  • Piccolink software (Equotip Piccolo 2 only)

Display & Memory:

  • Monochrome 4-digit display
  • 32 KB memory (~ 2’000 readings) (Equotip Piccolo 2 only)

Connections:

  • USB interface to PC

Temukan kami juga di:

Untuk Informasi Harga yang menarik hubungi kami:

Lihat juga produk ini

Proceq Ultrasonic Flaw Detector 100

Deskripsi Proceq Ultrasonic Flaw Detector 100 The Proceq Flaw Detector 100 a flexible high tech …